consumerkruto.blogg.se - Dos 2 unusual blade

Do comply with ANSI B7.1, OSHA and all safety materials provided with the wheel and machine.

Do review the MSDS (Material Safety Data Sheets) for the wheel and the material being cut before using the wheel.

Do follow all symbols and warnings located on the wheel.

Do always handle and store cut-off wheels in a careful manner.

Do maintain your tools as if your life depends on it.

Remove all flammable materials from the work area.

Do be aware of the spark stream and protect yourself and bystanders.

Do keep all body parts and clothing clear of the rotating wheel.

Do stop cutting and investigate any unusual sounds, vibrations, or anything abnormal.

Do cut only materials designed for the cut-off wheel (e.g.

Do feed the wheel into the workpiece at a moderate, constant rate.

Do prevent impacts to the cut-off wheel.

Do maintain the cut-off wheel at 90 degrees to the workpiece at all times.

Do use the cut-off wheel only for cutting, not grinding or deburring.

Do securely clamp the workpiece at both ends before cutting.

Do run the wheel in a protected area (such as under a bench) for one minute before cutting.

Do position the wheel guard so that it stands between the operator and the wheel.

Do mount portable cut-off wheels with proper flanges.

Do mount portable cut-off wheels only on grinders with proper guards.Do check machine speed against the maximum operating speed marked on the wheel.Do check all wheels for cracks or damage before use.Wear other PPE as needed, such as gloves, dust mask, apron, etc. Required PPE is safety glasses along with goggles or a face shield. Do wear the proper personal protective equipment (PPE).